Geotechnical Products and Systems currently available from Datem

Geotechnical products currently available from Datem are shown below, however if you have a need for an alternative type of system Datem could cater for your needs by designing and creating a system to your specification.

We have a wide range of geotechnical equipment available, from complete systems to geotechnical probes, commonly known as "Cones".
To jump to the Geotechnical System list click here, to jump to the Geotechnical Probe/Cone product list click here, otherwise scroll down at your leisure.

Geotechnical Systems and Products

Neptune 3000 - Miniature Coiled Rod CPT (Cone Penetration Test) System 2cm² Detatchable Cone Up to 10m Penetration from Coiled Rod Compact and Easily Deployed Sub-Sea Frame Real-Time Control and Display Single Coax Connection for Power and Data Automatic Safety Cut-Outs Low Maintenance, Low Consumable Use Easy to Operate Windows Based PC Control Data Comparable to 10cm² Systems Neptune 3000 - More information

Neptune 5000 - Heavy Duty Coiled Rod CPT System 5cm² Digital SmartCone 70Mpa/70kN Push Capability (3500kg) Up to 20m Penetration Depth Easily Deployed Compact Sub-Sea Frame Real-Time Control and Display Single Coax Connection for Power and Data Automatic Safety Cut-Outs Low Maintenance, Low Consumable Use Easy to Operate Windows Based PC Control Neptune 5000 - More information

Resistivity Data Acquisition System Datem has designed and manufactured a range of Shallow and Deepwater Resistivity Data Acquisition Systems intended for undertaking resistivity surveys or sub-sea soils. The systems work on the principle of passing a high current from one contact on a streamer cable, through the soil to a return contact. Arrangements of additional contacts are used for taking electrical measurements in relationship to the current path. The resulting calculated resistance readings are used to determine the soil composition. Resistivity Data Acquisition System - More Information

Cone De-Airing System Datem's Cone De-Airing system is a self contained vacuum system for saturating CPT cones. The system is fully portable and provides a facility for rapid evacuation of air from closed vacuum chamber enabling a better pore response during the Cone Penetration Test. Cone De-Airing System - More Information

Drill String System Information to follow	Picture to follow

Sampler System Information to follow	Picture to follow
Geotechnical Probes/Cones
Analogue MCPT Cone Datem manufactures MCPT cones for operation with third party systems. The cones are supplied without electronics and the upper housing of the cone is machined to match the thread of the third party CPT rod. The cones are easily detachable from the CPT rod so as to minimise consumable costs, and each cone is supplied with a multipoint calibration. Analogue MCPT Cone - More information

Digital 10cm RS485 Cone The digital 10cm RS485 Cone incorporates the latest developments in cone technology. The cone is designed primarily for operation with Datem’s Land CPT system and features high precision built in electronics to increase the accuracy and stability of the cone data. The amplified data outputs allow much improved signal transfer between the cone and the sub sea CPT control electronics. Onboard digitization eliminates signal noise and data corruption. Digital 10cm RS485 Cone - More Information

Neptune T-Bar Cone The Neptune 3000 T-Bar Cone incorporates the latest developments in miniature cone technology. The cone is designed specifically for operation with Datem’s Neptune 3000 MCPT system and features high precision built in electronics to increase the accuracy and stability of the cone data. The amplified data outputs allow much improved signal transfer between the cone and the sub sea CPT control electronics. The T-Bar cones are fitted with axial load, friction sleeve and dual axis tilt as standard. The T-Bar is based around a modified 5cm cone with increased sensitivity. The electronics housing has been specifically designed to mate to the normal CPT rod without the need for any adapters. The T-Bar cones are easily detachable from the CPT rod so as to minimize consumable costs, and each cone is supplied with a multipoint calibration. Neptune T-Bar Cone - More Information

SmartCone™ Datems SmartCone™ is available in CAN 5cm² format. Our SmartCone™ feature fully integrated advanced RISC microprocessors operated via RS232 serial communications link or intelligent CAN Bus. High Precision, built-in electronics including non-multiplexed delta-sigma converters, increase the accuracy and stability of the data. Individual Calibration Data is stored internally on non-volatile eeprom memory. SmartCone™ - More Information

Neptune 3000 MCPT Cone The Neptune 3000 MCPT Cone incorporates the latest developments in miniature cone technology. The cone is designed specifically for operation with Datem's Neptune 3000 system and features high precision built in electronics to increase the accuracy and stability of the cone data. The amplified data outputs allow much improved signal transfer between the cone and the sub sea CPT control electronics. Neptune 3000 MCPT Cone - More information

Infra-Red 10cm² Cone The digital 10cm Infra-Red Cone incorporates the latest developments in cone technology. The cone is designed primarily for operation with Datem’s Drillstring CPT system and features high precision built in electronics to increase the accuracy and stability of the cone data. The amplified data outputs allow much improved signal transfer between the cone and the sub sea CPT control electronics. Onboard digitization eliminates signal noise and data corruption. Digital 10cm Infra Red Cone - More information