- Meters specific rates of liquid additive chemicals to match
slurry rates.
- Automatic Control or Override
- Local & Remote Display
- Vented Stainless Steel Holding Tanks with Sight Glass, Removable
Lid and Lifting Points
- 160 Litres/minute Discharge
- Calibrated 4-20mA Mass Flow Sensors
- Re-Circ to Either Tank
- ISO Flat Face Connection for Hydraulic Power Supply
- Quick Release Connections for Easy Cleaning and Maintenance
- Safety Pressure Relief
- Integral Storage Baskets
- Crash Frame with Integral Gantry & Lifting Eyes
|
Download Liquid Additive System PDF Datasheet Here
In order to view the Datasheet, you must
have Adobe Acrobat Reader® installed on your machine. You may obtain a
free copy of this software by clicking on the Get Acrobat Reader button
below.
 |
Technical Specification (Specification can vary
depending on use)
|
|
Dimensions |
: 3.5m(L) x 1.3m(W) x 2.0m(H) |
|
Tank Storage |
: 1000 Litres x 2 |
|
Tank Construction |
: Welded 316 Stainless Steel |
|
Safety Relief |
: 120psi. 3m Long Hose |
|
Discharge Rate |
: 160 Litres/Minute each tank |
|
Discharge Hoses |
: 1", 10m Long Hose x 2 |
|
Hydraulic Requirement |
: 70 bar, 86 Litres/Minute, ISO VG68 |
|
Hydraulic Supply Hose |
: 8M 1"BSP(m) + Flat Face ISO Connector x 2 |
|
Electric Requirement |
: 12Vdc from DCU |
|
Auto Signal Requirement |
: 0-20mA from DCU |
|
Remote Control |
: Display + Rate Change Buttons |
|
Local Control |
: Display + Manual Valve Control |
|
|
| |
|
|
Download Liquid Additive System PDF Datasheet Here |
