Electrical and Mechanical Engineers - Specialising in the Geotechnical Industry - Datem Ltd
|
|
Electrical and Mechanical Engineers - Specialising in the Geotechnical Industry - Datem Ltd
|
|
The Neptune 3000 MCPT Cone incorporates the latest developments in miniature cone technology. The cone is designed specifically for operation with Datem’s Neptune 3000 MCPT system and features high precision built in electronics to increase the accuracy and stability of the cone data. The amplified data outputs allow much improved signal transfer between the cone and the sub sea CPT control electronics.
The cones are fitted with tip, friction sleeve and dual axis tilts as standard. There are various pore pressure sensor options available from 7bar to 350bar dependent on working depth. The cones are easily detachable from the CPT rod so as to minimize consumable costs, and each cone is supplied with a multipoint calibration. |
 Neptune 3000 2cm Cone Download Neptune 3000 CPT 2cm Cones PDF Datasheet Here In order to view the Datasheet, you must have Adobe Acrobat Reader® installed on your machine. You may obtain a free copy of this software by clicking on the Get Acrobat Reader button below.
|
| Technical Specification | |
|
Cone Type |
: Subtraction with Tilt (Piezo Optional) |
|
Max Tip Load |
: 1000kg / 10kN / 50MPa |
| Tip Area | : 200mm² |
| Tip Resolution | : 22kPa |
| Max Sleeve Load | : 150kg / 1.5kN / 500kPa |
| Sleeve Area | : 3000mm² |
| Sleeve Resolution | : 2kPa |
| Piezo Sensor Range | : 7, 35, 75, 150, 350 |
| Piezo Type | : U2 |
| Piezo Resolution | : Sensor Dependant Typ. 2-11kPa |
| Output | : 0-5Vdc |
| Power Requirement | : +/- 15Vdc |
Download Neptune 3000 CPT 2cm Cones PDF Datasheet Here |
|
