Electrical and Mechanical Engineers - Specialising in the Geotechnical Industry - Datem Ltd
|
|
Electrical and Mechanical Engineers - Specialising in the Geotechnical Industry - Datem Ltd
|
| The Neptune 3000 T-Bar Cone incorporates the latest developments in miniature cone technology. The cone is designed specifically for operation with Datem’s Neptune 3000 MCPT system and features high precision built in electronics to increase the accuracy and stability of the cone data. The amplified data outputs allow much improved signal transfer between the cone and the sub sea CPT control electronics. The T-Bar cones are fitted with axial load, friction sleeve and dual axis tilt as standard. The T-Bar is based around a modified 5cm cone with increased sensitivity. The electronics housing has been specifically designed to mate to the normal CPT rod without the need for any adapters. Each T-Bar cone is supplied with two inter-changeable T-Bars. The T-Bars are 158mm x 31.6mm and 96.2mm x 26mm. The T-Bar cones are easily detachable from the CPT rod so as to minimize consumable costs, and each cone is supplied with a multipoint calibration. |
|
| Technical Specification | |
|
Cone Type |
: T-Bar Non-Subtraction with Tilt |
|
Max T-Bar Load |
: 112kg |
| T-Bar Area | : 4993mm² or 2501mm² |
| T-Bar Resolution | : 0.04kg |
| Max Sleeve Load | : 100kg / 1kN / 130kPa |
| Sleeve Area | : 75000mm² |
| Sleeve Resolution | : 0.02kPa |
| Output | : Analogue 0-5Vdc |
| Power Requirement | : +/- 15Vdc |
Download Neptune T-Bar PDF Datasheet Here |
|
